Peel Stop VS Peel Bond: Total Comparison

Finding the perfect binding chemical can be a tough job. Especially, when there are so many different products out there who are very similar to each other. Among them, peel stop and peel bonds are the most popular ones.

So, which one to use: peel stop vs peel bonds?

To choose the right product you need to understand their pros and cons. Like the peel-stop will stick well and let your wall breathe. But you’ll have to remove the flaky parts first. Whereas peel-bonds reduce labor, prep time, and cracks. However, it’ll cause flaky exteriors and needs surface preparation.

But wait, a few sentences can’t explain the real deal. So, why don’t we take a look at this closely to see the actual matter?

Peel stop: All sides of the story

One of the greatest binding chemicals out there is the peel stop. They are amazing products. However, they aren’t completely flawless.

So, let’s take a look at all its pros and cons.

Here are a few recommended peel stop on paint–

• Rust-Oleum Corporation 60004 Clear Binding Sealer.
• Zinsser Peel Stop Clear Binding Sealer Water Based Exterior. Here is a nice video guide on how to use Zinsser peel stop.
• Zinsser 2301 Problem Surface Sealer.

Pros- the good sides

Firstly, let’s praise the peel-stop a little. So, here are some of its good sides.

Great sticking property

The peel stop has an amazing sticking property. So, they’ll bind all the cracks and holes and give a smooth finishing.

Hence, you won’t have to worry about your paint looking uneven. In fact, you’ll end up with a perfectly smooth wall.

Lets the walls breathe

Another reason to go for peel stop is that it stops the walls from peeling. They do this by letting the moisture out of the cage known as a wall.

So in a sense, it lets your wall breathe a bit. That’s why it ends up looking lively and stays in pristine condition for a long time.

Cons- the not so good sides

Like everything else in this world, even peel stops have some downsides. So let’s take a look at the deal-breaker of this chemical.

Need to remove flaky walls first

When it comes to applying peel stop you have to remove all the flaky crumbles from the walls. Otherwise, the peel stop will make a mess out of your entire work system.

So, you have to take the extra time to get all the flaky parts off the wall.

Peel bond: Both sides of the card

Next up is the peel bond. To be sure if this is the right product for you let’s take a quick look at both its pros and cons.

Here are some of our recommendations-

• kilz restoration maximum stain and odor blocking. Best Odor Blocking Primer
• KILZ Adhesion High-Bonding.
• INSL-X SXA110099-04 EMW1421981.
• XIM Peel Bond 152164 XIM Qt Peel Bonding Primer.

Pros- the best version

Although we will talk about both sides of the coin but first let’s focus on the pros. So here are the reasons why you should use peel bonds:

Reduces labor and prep time

The main reason to buy a peel bond is that it saves a lot of time. By that, we mean that you won’t have to waste any extra time peeling the flaky surface.

The peel bond will adjust everything and make your wall look smooth.

Reduces cracking and peeling

Another reason to use peel bonds is that it reduces cracking and peeling. They do this by being flexible over the life of the paint.

So, if you’re looking to cover up the cracks in your walls you can trust this handy product to get the job done.

Cons- the downside

Enough of the praises. Now, it’s time to look at the flaws of the famous peel bonds.

Let’s take a look, shall we?

Causes flaky exterior

After applying peel bonds you might witness a flaky wall. This is caused because the peel bond did not mix well with the existing paint on your wall.

So, it resulted in an allergic reaction. Thus you might want to be careful while choosing.

Needs surface preparation

Another downside to this great product is that it needs a prepared surface. If you don’t invest your time in the preparation of the surface the peel bond won’t mix well with the wall.

So, if you’re planning on using peel bonds make sure you have enough time to prepare the surface properly.

Peel stop vs peel bond: Side by side comparison

That’s all the pros and cons of peel stop and peel bond. Now let’s compare them side by side to get to know the real difference.

PEEL STOP	PEEL BOND
Peel stop lets the walls breathe. They let the moisture out of the wall.	Peel bonds don’t allow the space for the walls to breathe.
You need to remove the flaky walls first.	You can apply the peel bond in one go.
You won’t have to prepare the surface.	You’ll have to make preparations before applying peel bonds.

FAQ

Question: Does peel stop working after the surface has been scraped?

Answer: Yes, peel stop works even when the surface has been scraped. In fact, this amazing product can slip into tiny littles holes and glue them together. And the bond will be super strong so you won’t have to worry about it coming apart.

Question: Can you spray peel stop?

Answer: Although most of you might be familiar with the peel stop that comes in buckets but it also comes in a spray form. You can buy it from the local store or order it online. Then you can spray it on your wall. So, you won’t even need your brush or have to go through the hassle of painting the peel stop.

Question: What is a peel bonding primer?

Answer: A peel bonding primer is a unique primer that can seal up the walls neatly. So, you won’t have to worry about any cracks while you paint. And in the end, you’ll have a smooth finished wall to admire.

To wrap up

That’s all we had on the comparison of peel stop vs peel bond. We hope you know which one to use. But if you’re still confused go with the peel stop.

And once you’re done using it do tell us about your experience. We’ll love to learn more about your experience.

Till next time then. Stay safe. Bye-bye!