How To Install Toilet Paper Holder In Drywall

Are you tired of constantly struggling to keep your toilet paper rolls organized?

Don’t worry, we’ve got you covered! Installing a toilet paper holder in drywall is a quick and easy DIY project that anyone can do with a few basic tools and some easy-to-follow steps.

Not only will a toilet paper holder keep your bathroom looking neat and tidy, but it will also ensure that you never have to search for a lost roll again. So, let’s get started and learn how to install a toilet paper holder in drywall like a pro!

How to Install a Toilet Paper Holder in Drywall

Installing a toilet paper holder is a simple and easy DIY project that can be completed in just a few steps. However, if you are installing the holder in drywall, there are a few additional steps you need to take to ensure that the holder is securely mounted and won’t fall off the wall. In this article, we will guide you through the process of installing a toilet paper holder in drywall.

Step 1: Choose the Right Spot

Before installing the toilet paper holder, you need to decide where you want it to be placed. Typically, the holder is mounted on the wall next to the toilet, within easy reach. However, you should avoid placing it too close to the toilet, as it may get wet or interfere with the toilet seat.

Once you have chosen the spot, use a measuring tape to mark the exact location where you want to install the holder. It’s essential to ensure that the holder is level and centered, so take your time to measure and mark the spot accurately.

Step 2: Gather the Tools and Materials

To install the toilet paper holder, you will need a few tools and materials, including:

• Electric drill
• Drill bit
• Screwdriver
• Level
• Pencil
• Toilet paper holder
• Wall anchors
• Screws

Step 3: Install the Wall Anchors

Drywall is not strong enough to support the weight of a toilet paper holder, so you need to use wall anchors to secure the holder in place. Start by drilling a small hole where you marked the spot for the holder. Then, insert the wall anchor into the hole and tap it gently with a hammer until it is flush with the wall.

Repeat the process for all the holes where you want to install the holder. Make sure that the wall anchors are evenly spaced and level.

Step 4: Mount the Toilet Paper Holder

With the wall anchors in place, you can now mount the toilet paper holder. Hold the holder against the wall and align the screw holes with the wall anchors. Insert the screws into the holes and tighten them with a screwdriver.

Check that the holder is level and secure, and adjust if necessary. Once you are satisfied with the placement, you can insert a roll of toilet paper into the holder and start using it.

Benefits of Installing a Toilet Paper Holder

Installing a toilet paper holder in your bathroom has several benefits. Firstly, it provides a convenient and hygienic place to store and dispense toilet paper. Secondly, it helps to keep the bathroom neat and organized by ensuring that the toilet paper is always in its place. Finally, it adds a touch of style and elegance to your bathroom, as there are many different styles and finishes available to choose from.

Toilet Paper Holder vs. Alternatives

While a toilet paper holder is a popular choice for storing and dispensing toilet paper, there are several alternatives available. These include:

• Freestanding toilet paper holder
• Wall-mounted toilet paper dispenser
• Toilet paper basket

While these alternatives may be suitable for some bathrooms, a toilet paper holder is often the most practical and convenient option. It takes up minimal space, is easy to use, and is typically more hygienic than the alternatives.

Frequently Asked Questions

Here are some common questions and answers regarding the installation of a toilet paper holder in drywall:

What tools are required for installing a toilet paper holder in drywall?

Before starting the installation process, you will need a few tools, including a measuring tape, a pencil, a level, a drill, a screwdriver, and a drywall anchor kit. Make sure you have all of these tools handy before you begin.

It’s also a good idea to wear safety goggles and gloves to protect yourself from any debris that may be generated during the installation process.

How do I locate the ideal spot for the toilet paper holder in drywall?

The first step is to decide where you want to mount the toilet paper holder. Use a measuring tape to determine the ideal height for the holder, which is typically between 26 and 28 inches from the floor. Once you have determined the height, use a level and a pencil to mark the spot on the wall.

Make sure to double-check your measurements and markings before drilling any holes to ensure that the toilet paper holder is level and properly aligned.

What is the process for installing a toilet paper holder in drywall?

Begin by drilling a hole into the drywall where you have marked the spot for the toilet paper holder. Then, insert a drywall anchor into the hole. The drywall anchor will provide the necessary support for the screws that will hold the toilet paper holder in place.

Next, align the mounting plate of the toilet paper holder with the anchor and use screws to secure it in place. Finally, attach the toilet paper holder to the mounting plate according to the manufacturer’s instructions.

Can I install a toilet paper holder in drywall without using a drywall anchor?

No, it is not recommended to install a toilet paper holder in drywall without using a drywall anchor. Drywall is not strong enough to support the weight of a toilet paper holder on its own. Installing the holder without an anchor could result in damage to the wall or the holder falling off.

Using a drywall anchor ensures that the toilet paper holder is securely attached to the wall and will not come loose over time.

What should I do if I encounter any issues during the installation process?

If you encounter any issues during the installation process, such as difficulty drilling into the drywall or problems aligning the mounting plate, do not force the installation. Take a break, reassess the situation, and try again.

If you are still having difficulty, consult the manufacturer’s instructions or seek assistance from a professional handyman or contractor.

Installing a toilet paper holder in drywall is a relatively simple task that can add a lot of convenience to your bathroom. By following these easy steps, you can ensure that your toilet paper holder is securely attached to the wall and can hold up to regular use.

First, gather your tools and materials, including a drill, screws, and a toilet paper holder kit. Next, locate the studs in your wall and mark where you want to place your holder. Finally, drill the holes and attach the holder using the provided hardware.

With these steps, you can have a functional and stylish toilet paper holder in your bathroom in no time. Don’t hesitate to try it out and enjoy the added convenience it brings to your daily routine. Happy installing!

Conclusion

In summary, installing a toilet paper holder in drywall is a simple and easy DIY project that can be completed in just a few steps.

By following the steps outlined in this article, you can ensure that your toilet paper holder is securely mounted and won’t fall off the wall.

Additionally, by choosing the right spot and style of holder, you can add a touch of style and elegance to your bathroom while keeping it organized and hygienic.