Almost everybody complains that bathtub stains won’t come out or is looking for a bathtub whitener. So, many people ask that- “how do I get my bathtub white again?” To whiten the bathtub again as like as new you can follow some steps.
This is especially true for children and seniors, who may be more sensitive to these bacteria and viruses. Living in a house full of disease can cause stress and other health problems that will take a toll on your well-being. So, you need to keep your bathtub clean and new.
However, in this content, you will get to know about the ways and the process of making your bathroom white again. So, without wasting any time, let’s start.
Why Keep Your Bathtub Clean?
It may seem like a trivial thing to clean your tub – but there are many reasons why you should make sure it’s clean and sparkling at all times.
The reason is that dirty bathtubs can breed disease. The bacteria that forms on the surface of dirty, grimy shower tiles and walls can transfer itself to your skin every time you take a shower or a bath.
However, It is not necessary to have a severe case of ringworm for this disease to be transmitted to your body. An environment with high humidity and moisture can make it easy for stool bugs to thrive in your tub, which increases the risk of infecting yourself when taking baths or showers.
4 Solution to Get the New Look Back
Like most people, you may have a bathroom that features a bathtub. You might have noticed that the color of your tub seems to have faded over time and is looking less white than it used to be.
Additionally, soap scum residue can build up on your tub’s surface, making the problem even worse. Luckily, there are many ways in which you can return your bathtub to its original state of being white.
Here are 4 ways that you can use to get rid of the stains on your tub and bring it back to looking new:
- Use a Magic Eraser.
- Use a Bleach and Ammonia Solution.
- Wax the Tub.
- Use Vinegar and Baking Soda.
Use a Magic Eraser
A Magic Eraser is an ideal way to remove mildew stains and soap scum that has built up in your tub. The sponge is made with a special compound that helps lift stains from surfaces without causing damage to them. Simply dampen a Magic Eraser and scrub the areas of the tub where there are noticeable stains.
Since it’s a stain remover, you shouldn’t have any problems getting rid of grime and mildew. Just make sure you don’t use it on acrylic tubs since the product is so abrasive that it can cause damage to the surface.
Use a Bleach and Ammonia Solution
This is the best way to remove scum from your tub that has been there for a while. It’s important to ensure that the surface of your bathtub is not scratched before you use this solution because it can cause damage. This solution is simple–combine one-part bleach with one-part ammonia.
Make sure you wear gloves when you handle the mixture and make sure that it is not inhaled or allowed to come into contact with your skin. Next, wet a sponge in the solution and scrub away any scum on the tub. By following these easy steps, you should be able to get rid of the stains within minutes.
Wax the Tub
There are products available which coat your tub and protect it from soap scum and stains. When purchasing such a product, make sure to read the label so you know which surfaces can and cannot be waxed. The coating will prevent soap scum from sticking, which will make your bathtub easier to clean going forward. You should reapply a new coat of wax every three months for maximum protection.
Use Vinegar and Baking Soda
The combination of vinegar and baking soda is ideal for scrubbing away stains that are already present in your tub. Mix water with the two items until you have a thick paste. Then, apply the mixture to your tub and scrub at it with a bristle brush.
This process is an easy way to remove mildew and soap scum that has already built up in your tub. The vinegar and baking soda work together to help break down these stains for easier removal, leaving a clean surface behind them.
How Do I Get My Bathtub White Again?
Have you ever wanted to restore your old bathtub with its original look? If so, it is possible through the use of products available at various department stores or hardware stores.
A restoration process can be done by anyone and will not take long at all with the right tools. By using a few easy steps, you too can have that “new” looking tub again.
So, how to clean a disgusting bathtub? Let’s see the steps-
Step 1: Gather Tools
You will need to gather some tools. The first tool you will need is a wire brush currently available at most hardware stores near the paint section. You also need an old towel or two and rubber gloves so that your hands don’t get cut by any sharp pieces of metal on the tub surface after you begin brushing.
Step 2: Cleaning Solution
you need to find a product that will strip the old paint and rust off of your bathtub and allow for a fresh coat. Purchase an all-purpose cleaning solution from any department store. Read the instructions on the label before beginning this task because different products require you to use certain materials as well as methods to complete the process.
Step 3: Use Soap and Water
You must scrub any rust or paint that is present on your bathtub with a wire brush to get it off and expose the bare metal underneath. Use soap and water to clean any loose paint chips from the surface of the tub after brushing.
Step 4: Apply the Cleaning Solution
Apply an all-purpose cleaning solution using a rag or sponge. Let the solution sit for about fifteen to thirty minutes, depending on how long it says to let it sit. For instance, some products may need only three minutes before you can wipe off the excess paint, while others require much longer.
Step 5: Wipe
Use a clean rag or sponge to wipe away any loose pieces of paint or rust that have been stripped from the bathtub.
Step 6: Restore (optional)
Take the cleaning solution you used and pour it into a spray bottle for future use. You can use this to clean up any remaining rust or paint once it has been removed from your bathtub surface.
A restoration process is very easy and does not require a professional to do it for you. With proper tools and methods, your old bathtub can be restored to look brand new again in no time.
FAQs
- How to get a plastic bathtub white again?
– Well, you know how these tiny organisms like to attach themselves to surfaces and grow. That’s exactly what happened here, even though you cleaned it well with hot water and soap. You can follow our solution to make it white again.
- How do you clean a badly stained bathtub?
– Manpower is more effective than anything. Honestly, I did not spend time cleaning my tub for about three weeks, and it was stained beyond belief. It would have taken me hours to get it looking good again so when my friend suggested using bleach, I went right ahead and tried it.
Final Note
You can choose the best cleaner for bathtub stains, which will make it clean and new within a very short time. The more you use the best product, the less it will cost you strength. You need to be patient while cleaning the bathtub.
