How To Clean Bathroom Floor Tiles With Acid: 5 Steps

The tiles in your bathroom may look shiny and inviting, but they’re crawling with germs. Vinegar or baking soda, for example, can be used to disinfect your tile floor. However, using acid is the most successful method.

You might be thinking, how to clean bathroom floor tiles with acid?

The steps are very simple. After taking precautions, you’ll have to prepare two solutions. First, clean the tiles in an organic way. Second, use the acid solution to clean the tiles. Once you’re done, splash the area with clean water.

That’s not all. There’s a lot more to know than just what we’ve mentioned above. Lucky for you, we’ve got it waiting for you. Just stay with us till the end, and you’ll be done in no time.

Hop in-

5 Easy Steps On How To Clean Bathroom Floor Tiles With Acid

As we’ve said, the best way to clean bathroom tiles is by using good cleaning acid. If you don’t clean your bathroom tiles, germs grow at a faster rate because of the humidity. Furthermore, the warm temperature is favorable for bacterial development. 

The instructions below will show you how to use acid to clean bathroom floor tiles. And also discuss the advantages of this cleaning agent over traditional methods.

Required Tools

There are a few tools that you’ll need before we start the procedure.

• Spray bottle
• Rubber gloves
• Safety goggles
• Stiff brush

If you’ve got them all, let’s not waste time anymore and dive into the procedure.

Step 1: Ensuring Proper Ventilation

Open doors and windows and turn on any exhaust fans to ventilate the space.  It’s very important to ensure proper ventilation where you’ll be working. Place fans throughout the room or area if necessary to maintain proper ventilation.

Step 2: Taking Precautions

As with any project, preparation is critical for success. Before you begin cleaning bathroom floor tiles with acid, you must do some prep work. 

First, turn off the power to the room at your fuse box or circuit breaker control. Additionally, while working on your tiles, use rubber gloves and eye protection.

Keep an open container of baking soda or gardening lime on hand. If there’s an acid leak, baking soda or lime will help to detoxify it.

While cleaning bathroom floor tiles with acid you need to be as safe as possible. That’s why we emphasize this step so much before getting into the actual work.

Step 3: Preparing Solution

The next step is to prepare a solution. Make a solution by combining three parts of water and one part of vinegar. This should be done in a bucket or other container. 

While it’s not necessary, some people prefer to use distilled vinegar. That’s due to the elimination of impurities from the water. Now mix the two ingredients thoroughly, then fill a spray bottle with the solution.

Step 4: Cleaning Tiles

Next, scrub the tiles with a long-handled nylon-bristle brush to remove any dirt or debris. This step is especially important if the tiles have been neglected for some time. Or haven’t been cleaned in a while. 

Clean the grout lines between the tiles using a hard scrub brush as well. Do this to get rid of any dirt or other debris that may have gotten stuck within. Once done, rinse all areas of your bathroom floor clean. Do this with clean water from your spray bottle. 

If you’re looking for a perfect stiff scrub brush, we have some suggestions. Just take a look-

We’ve recommended these products because they are durable. They’re also quite effective. So go ahead and buy one of them right now. It’s also entirely up to you whether or not you choose to follow our advice.

If your tiles are polished marble or stone, you may want to use plain water over vinegar. This will help to avoid dulling their shine.

Step 5: Cleaning With Acid

If you’ve finished the previous steps, you’re ready to clean bathroom floor tiles with acid. Set up a bucket with one gallon of vinegar or diluted household acid. 

Gently pour 1 cup muriatic acid into the bucket of water. When measuring acid, avoid using a metal container. Use a plastic or glass jar instead. A chemical reaction can occur if you use a metal container. Causing the acid to bubble and release hazardous odors.

Now spray the solution over the tiles and start scrubbing them. Scrub them with the same scrub brush that you’ve used before.

After you finish scrubbing the tiles, pour the boiling cloudy mixture on them. After that, let it sit for around 15 minutes before thoroughly washing all areas with water. 

If the floor is polished marble or stone, you may want to use plain water over vinegar. This will assist you to avoid dulling their shine. 

There you go! Wasn’t this the easiest thing to do! Just like we promised. We hope these steps are as clear to you as we’ve wanted them to be. However, you might have doubts. That’s why we’ve kept an FAQ section. Just take a quick peek.

FAQs

Question: Is bleach safe to use on ceramic tile?

Answer: Scrubbing too hard or using abrasive cleaning solutions can scrape the tile. It may lose its luster as a result of this. Since ceramic tile is generally coated with a glaze. Which is readily destroyed by harsh cleaners and abrasive equipment.

Question: Is vinegar harmful to tile?

Answer: The good news is that if used properly, vinegar will not harm your porcelain tiles. While the best option for your floors is a fully safe, natural, and vegan-friendly cleaner. You must be cautious in your application.

Question: Is mixing vinegar with Dawn dish soap safe?

Answer: For a variety of reasons, the combination of dish soap and vinegar is extremely effective. Vinegar on its own will just run off most surfaces. However, when you combine the two, you obtain a powerful, sprayable cleaner that adheres to any surface.

Summing Up

Kudos! You’ve made it all the way to the conclusion. We’ve explained how to clean bathroom floor tiles with acid. We hope you can pull it off pretty easily. 

Nevertheless, if you have any queries, feel free to reach out. We’re all ears. 

Till then, all the best wishes.