How to Clean Bathroom Glass: [4 Steps To Know]

A filthy bathroom glass door or glass wall may detract from a tidy bathroom. Cleaning bathroom glass requires more than a soapy sponge or glass cleaner. However, with a bit of cleaning sense, those stubborn water stains are no match!

So, how to clean bathroom glass?

First, spray the bathroom glass with vinegar. Before cleaning it, let it rest for about 5 minutes. Afterward, apply a paste consisting of equal parts baking soda and salt. The paste should be mixed in an equal ratio. The mixture should be rubbed using a wet sponge or cloth. After that, thoroughly rinse to remove the remaining dirt.

That was the sneak peek. To make things easier for you, we’ve segmented the whole process into steps and 

We will come back to this further down the article but here’s a link if you want to see more about the special glass cleaners for bathroom.

So, what are you waiting for? Let’s get started!

How to Clean Bathroom Glass

What Causes Filthy Bathroom Glass?

Glass shower doors that are filthy are caused by a multitude of reasons. There are, however, two that come up the most often. Such as-

Soap Scum

To conclude, soap scum is the white coating. This forms on the shower walls after frequent usage. Soap scum mostly takes place because of the hard water. 

Hard water is mineral-rich, it generates soap scum and other stains. Minerals like magnesium and calcium react with soap to create this scum.

Even if only hair products and body wash are used, soap scum can form. This is a problem that usually develops slowly, causing harm before it is realized. 


Mildew is a common problem in many houses. Shower doors with filthy glass may be blamed on this as well. As time passes, the door joints accumulate a layer of black grime. Uncleaned soap scum is thought to be a factor in mold growth and mildew in the bathroom. 

On a purely scientific level, mildew is nothing more than fungal filaments. That is known as hyphae. But it can spread very rapidly. When it comes to mildew growth, a warm, moist atmosphere is ideal. Do you know which place has this exact atmosphere?

Yup, your shower!

Hard Water Issue

Following is an example of hard water spots. They are white in color, which makes them seem similar to soap scum. Sometimes there is a high concentration of minerals in the water. This ruins your whole shower experience.

See also  How to Clean Bathroom Grout Mold? (Easy and Quick Solutions)

After a shower, the minerals in hard water are left behind. Hence, you see spots on the glass shower doors that are unsightly.

How to Clean Bathroom Glass? [Step-by-Step]

If you’ve ignored your doors for an extended time, you make an extra effort while cleaning them. But don’t be worried: all is well! Your glass doors will be spotless in no time if you enlist our assistance.

Required Items

  • Squeegee
  • Microfiber cloth or soft sponge
  • Spray bottle
  • Vinegar
  • Dish cleaner
  • Baking soda
  • Glass cleaner (optional)

After arranging these, you can go through the steps.

Here are the steps below-

Step 1: Prepare Your Mixture

Consider using a natural cleanser like vinegar to remove minor soap scum. Combine dish soap and vinegar in a bottle. Make a cleaning spray by shaking the container.

If you don’t want a powerful vinegar spray, dilute it with 1 part water. However, for harder stains, we suggest the first combination.

Now, we wanted to provide you with some high-quality vinegar- 

Product-1- Heinz Cleaning Vinegar. 
Product-2- Natural Distilled White Vinegar. 

These will surely come in handy!

Step 2: Use the Spray & Wait

Once you’ve made your spray, apply it liberally to the shower door. Spray in every corner. Especially where scum has accumulated. 

Allow about 30 minutes for the mixture to settle before using. Within that time the mixture will penetrate the soap scum.

Note: If you have little scum and are worried about streaks, use lemon water instead.

Step-3: Remove Mixture by Scrubbing and Wiping

After waiting at least 30 minutes, begin scrubbing your doors. But depending on how much accumulation you have, this step may take longer. 

Now, remove all of the mixtures from your doors. Use a gentle sponge to clean it. Also, you can use a microfiber towel to clean it. Then, if there’s any leftover debris, wipe it away.

Step 4: Add Some Shine

It’s time to add some shine to the doors. So, spray your door down with a professional glass cleaner. Make sure to pick the best glass cleaner for your bathroom.

Then concentrate on any remaining stains. Wipe it down with a microfiber cloth. 

Alternative Ways to Clean Bathroom Glass

Now, you might look for different methods to clean your bathroom glass doors. As the above method takes a lot of cleaning agents and time. 

See also  4 Simple Steps to Clean Bathroom Vent Pipe

So, how to clean bathroom shower glass door?

You can clean the glass door in 4 different ways. Vinegar, lemon juice, and baking soda are the common cleaning agents to clean the glass.  

Anyhow, let’s check out the alternative methods-

Method-1: Vinegar & Water

A cheap and practical way to clean your shower doors or glass is by using white vinegar. You only need to use a standard solution of white vinegar. Add it to 3 portions of warm distilled water over the glass. That will make it sparkling clean once again. 

Wait for 10 minutes afterward. Once the time is up, remove it using a cloth. In addition to newspapers, paper towels are an option. Lastly, don’t forget to rinse your bathroom glass with warm water.

Method-2: Vinegar & Soap

Dishwashing soap and white vinegar are combined in an equal part for this approach. Clean the shower cabin’s glass door with the liquid in a sponge dispenser. Once you’re done cleaning, rinse with warm water. 

Method-3: Baking Soda with Vinegar

Firstly, mix 1/2 cup of baking soda and ½ of cup vinegar to make the paste. Scrub it with a cloth or paper towel after 10–15 minutes. You can use this method to clean stains from your toilet bowl too.

Once you’re done, rinse warm water through the solution to remove any remaining grit.

Method-4: Lemon & Water

Prepare two or three lemons and squeeze them. Add three teaspoons per cup of distilled water to a bowl. You can also combine it with some lemon juice at this point.

After that, by using a spray bottle, spray the shower glass with the mixture. After five minutes, dry the glass with a microfiber towel.

How to Clean Bathroom Partition Glass?

Cleaning glass partition surfaces make your house more appealing.  Incorrect cleaning methods can result in streaked glass surfaces. That’s why you should know the correct ways to do it. 

Here are a few tips to get you started on how to clean bathroom glass partition. Such as-

Tip-1: Keep Everything Clean from Top to Bottom

Keep your home spotless by cleaning it from top to bottom at all times. Streaks will be less noticeable as a result of this change. Some of us start at the bottom, which makes cleaning more difficult. It’s best to wipe upwards. 

See also  Are Single Handle Faucets Better For Your Bathroom?

Tip-2: Don’t Use Excess Solution

Using a lot of cleaning solutions won’t dissolve all the dirt and create streaks. Ensure that your cleaned surface is free of any solution. 

Tip-3: Select Appropriate Cloth

Select the appropriate cloth for cleaning. Instead of a cotton towel, use a paper or microfibre cloth. Because cotton emits lint, which readily accumulates on glass. 

Using newspapers is also wrong. Because they don’t absorb ink. Plus they get your hands filthy. 

Tip-4: Choose Distilled Water

Most of us have no idea how to choose the best water. Tap water should be avoided in favor of distilled water. Due to the fact that tap water leaves behind stains. Simply put, tap water creates stains on the glass due to contaminants.

Tip-5: Clean All the Frames

Don’t forget to clean the frames of aluminum windows, doors, or even wood frames. Water dripping from such surfaces is often ignored, causing frame damage. 

So, cover the frame with a towel. The cloth protects and absorbs the residue.

That’s everything! These are things you should know to clean bathroom glass.


Question: How to shine dull glass?

Answer: Remove calcium and magnesium ions from hard water by wiping the glass with acetone. Then gently scrub with a light detergent. Another excellent home cure is to put your glass for 15 minutes in pure white distilled vinegar.

Question: How to remove thick limescale?

Answer: Lemon juice and vinegar are two of the most potent remedies. Lemon juice is a great all-purpose cleaner that also has a pleasant scent. When it comes to acidic, only two things come to mind: vinegar and lime juice. Hence, they may be used to remove thick limescale.

Question: Can a magic eraser work on a glass surface?

Answer: A magic eraser can work on a glass surface. Just swipe your Magic Eraser over the glass shower doors. Soap scum and hard water buildup can be easily removed with a few wipes. It won’t take long for your grubby doors to shine again.


That was all we had to say about how to clean bathroom glass. Cleaning is only effective if done correctly. 

Hopefully, you enjoyed our discussion. Also, you want to deal with it properly as soon as possible. Please contact us as soon as possible; we eagerly await your response.

Have a great time and be safe until we talk again!

Leave a Reply

Your email address will not be published. Required fields are marked *