How To Clean Up Drywall Dust from Hardwood Floors?

You’ve got hardwood floors in your house and they are almost regularly filled with dust. But you’re not certain of the ways to clean it up! Fortunately, we’ve got the directions here!

So, how to clean up drywall dust from hardwood floors?

Well, there are some directions which are quite simple to follow. First of all, you need to gather up the required tools. Then filter your vacuum with a filter bag. After that, you need to vacuum and brush the floor. Finally, just scrape, vacuum again, and end the process by wiping.

Now, manage yourself some time to read it entirely. Because the information you’ve got so far is just a brief! 

Sounds interesting? Let’s jump into it right away!

How To Remove Drywall Dust from Hardwood Floors?

You’ve already got the gist of how to do it. However, you have to go through them in depth.

Before that, you need to have the required tools first. Because we can’t get started without the tools that are necessary for this. So, the required tools are mentioned below-

• A vacuum cleaner. Here you can see our recommendations for vacuum cleaners for hardwood floors.
• A brush. You can find our recommended brushes for hardwood floors here.
• A piece of clean cloth for wiping.

If you have got these, let’s start-

Direction 1: Putting The Filter Bag in The Vacuum

Before going in this direction, let’s get to know one important thing. That is, A HEPA filter does not have to be installed in your vacuum. Some people believe this can only be used to contain drywall dust. 

But a normal filter bag would be great for this as well. However, you must make sure that there are no holes in the bag. 

It’s recommended to empty the bag or vacuum before you start vacuuming. Moreover, check it frequently and empty it as needed if the job is extensive.

Extra tip: Once you’re done with the vacuuming task, make sure you clean the filter properly. Moreover, it’s a must to clean your vacuum cleaner once after 3 months. 

Nevertheless, don’t forget to replace the filter of your vacuum cleaner when required. Because using it for so long is bad for your vacuum cleaner. As a result, your vacuum cleaner eventually gets jammed and goes out of order.

Direction 2: Vacuuming And Brushing

Now, you have a fully functional vacuum with the correct filter. So, it’s quite simple to remove drywall dust and debris from a hardwood floor. But make sure that a beater bar is not included in your vacuum accessories. 

However, if it’s still included, turn it off. If you don’t, it may redistribute as much dust as it collects into the air. 

Then vacuum the entire floor using the vacuum. After that, focus on dusting the cracks and grooves between the boards. 

Remember that it’s best to do it where it’s most likely to have gathered. 

So, just use a brush to clean the dust out of the grooves after vacuuming. Make sure to wear a mask while you’re vacuuming the dust. 

Because you might be sensitive to it. Plus it’s always better to wear a mask while dealing with dust.

Direction 3: Scraping, Vacuuming, & Wiping

Now, remove any blotches of hardened joint compounds that have remained on the floor. Brush the dust out of the cracks while you’re at it. Because it’s a good time to do it. Then remove any dirty dust with a plastic putty knife. Here I’ve talked about cleaning joint compound off tools.

For your information, it isn’t as likely as a metal one to scratch the floor. But most blotches can be scraped away by hand. 

However, some dust may be difficult to remove. So, using a hammer, tap the putty knife to loosen them. 

After that, vacuum again after you’ve completed brushing and scraping. Then wipe the floor clean. You may do it using a slightly wet cloth or towel. This would get rid of the fine dust that the vacuum couldn’t reach.

Then rinse the cloth. After that, properly wring the cloth out. This will ensure that there isn’t too much water on the floor. Dry the floor once it’s clean. You can use a dry cloth or a towel to do it. 

Make sure to dry the floor in no time. Because keeping the floor wet leads to another problem. To be exact, your floor might have an issue with water on it for a long time. That is, your floor might have discoloration and other issues. So, dry out your floor as soon as possible.

These are the directions to follow to resolve this issue!

Check this guide to know more: How to Clean Up Floor After Texture: The Beginner’s Guide.

Also, read the related guide: The Process of Cleaning Floorboards with Methylated Spirit.

Related Questions

Question: Will drywall dust ruin hardwood floors?

Answer: Furniture and rugs can be ruined by dust. Furthermore, it can damage a hardwood floor’s finish. Besides, dust is produced at every stage of the building. Demolition and drywall sanding, on the other hand, are the dirtiest jobs. Therefore, drywall dust would eventually ruin hardwood floors.

Question: Can you mop up drywall dust?

Answer: Cleaning drywall dust with water is the most effective method. The water is absorbed by the dust. Moreover, it gets too hefty to float in the air. The drywall dust can then be swept or vacuumed without kicking up more dust. Simply clean the walls down with a moist cloth. This is how you can mop up the drywall dust.

Here is a helpful video on how to clean drywall dust off wood floors.

Question: Is drywall dust dangerous?

Answer: Breathing the dust from drywall joint chemicals might cause health problems over time! Coughing, phlegm production, and breathing difficulties are all symptoms of persistent throat and airway irritation. Furthermore, smokers and workers with sinus or respiratory disorders may face even more serious health issues.

Final Words

Now, you know how to remove sheetrock dust from wood floors! We believe our directions are quite simple to follow. 

Make sure to leave a comment for any queries regarding the cleaning niche!